EL2000
Reader/encoder module
Main features
- Simultaneously processing of the magnetica tracks ISO & Central
- Cards management with multiple introduction possibilities
- Embossed cards in conformità with ISO 7811/3 allowed
- Communication by means of RS232/RS485 serial interface
- Special Head stack with floating magnetica heads gimbals
- SMD low consumption elettronica circuits
- Two levels head signal amplification
- Single write and verify command
- Automatic retro capability
- Self-diagnostic commando on board
- Optional inulte mouths
- Smart card contactor
- Overall description
- Card/Ticket specifications
- Environmental
- Reliability
Outline dimensions
90 (H) x 192 (L) x 72 (W) mm
Weight
01,5 kg
Electronics
With microprocessor (Motorola 68HC11k1)
Transport method
Stepping Motor and belt
Ticket sensors
Photosensors
Output interface
RS232/RS485
Power requirements
+24V DC +/-10% 1.5A +5V DC +/-5% 0.3A
Track configuration
ISO 1, ISO 2, ISO 3 & CENTRAL
Bit density
210 or 75 Bpi
Recording method
Double densità DF (NRZ) ISO 7811
Transport speed
500 mm/sec
Coercitivity
Up to 4,000 Oe
Paper
Smooth or embossed (ISO 7811/3)
Length
From 85.60 to 120 mm
Width
53.98 mm
Thickness
From 0.15 to 0.80 mm
Operating temperature
From 0 to + 65°C
Storage temperature
From -30 to + 85°C
Relative humidity
From 20 to 80% (No condensation)
Mtbf
50,000 hours
Heads life
2,000,000 cycles
Error rate
1/2,000 cycles
Transport life
2,000,000 cycles
